Stabilis E-SP

Name: Stabilis E-SP
SKU: 138961
Availability: InStock

Price range: RM43.50 through RM181.25

STABILIS E-SP is a primer that can be used as a temporary protective coating for blast-cleaned steel plates and structures.

Size

Colors

Clear

Request Quote

[ht-ctc-chat call_to_action="Whatsapp Enquiry" pre_filled="Hello ,I would like to inquire on {{url}}" style=8]

Wishlist

SKU: N/A Category: Stabilis Tags: shop primer, steel plates

Weight	N/A
Features	Corrosive Resistance, Weather Resistance
Paints	Metal Paint, Primers, Sealers & Undercoats, Exterior Paint, Surface Treatment
Size	1 Litre, 2 Litres, 5 Litres
Colors	Brown, Grey, Red

Description

STABILIS E-SP is a two-component, fast-drying, pure epoxy zinc phosphate shop primer that can be used as a temporary protective coating for blast-cleaned steel plates and structures. It is easy to use and has excellent application workability and mechanical and physical properties. The expected service life of STABILIS E-SP is 4 – 6 months for outdoor exposure at 20-30 microns.

Features

Easy to use – spray, brush, roller
General purpose & fast dry Epoxy Zinc phosphate blasting Primer.
Compatible with other types of subsequent coating except for inorganic paint.
Excellent application workability, mechanical and physical properties for heavy-duty application
Better weldability without any hazardous effect and good heat resistance properties.
Good anti-corrosion properties expected service life of 4 – 6 months for outdoor exposure at 20-30µ.

Typical Uses

Suitable for use as temporary protective coating and shop primer for blast-cleaned steel plates and structures. Especially suitable for steel plates subjected to prolonged weathering. Fast dry and good weldability make it a suitable shop primer for auto or manual blasting lines.

Physical Data

Color	:	Red Brown, Grey
Flash Points	:	Base : 3.0 ⁰C Hardener : 7.0 ⁰C
Volume Solid	:	25+/- 2%
VOC(as supplied)	:	725g/L
Shelf Life @25⁰C / indoor	:	12 months

Typical Thickness: 20 ~ 40µ dried film.

Drying Time(at Dry Film Thickness 25µ)	Temperature	10⁰C	20⁰C	30⁰C
	Surface Dry	6 mins	3 mins	2 mins
	Hard Dry	135 mins	90 mins	45 mins
Painting interval:	Minimum	19 hrs	16 hrs	8.0 hrs
Painting interval:	Max. (self)	120 D	120 D	90D
Pot LIfe		48 hrs	24hrs	18hrs
Theoretical coverage (at DFT 20- 25µ)		0.08~0.10 L/m² ; 12.5 ~ 10.0m²/L
Service temperature		-60 to 150⁰C (dry)

Application Data

Mixing ratio : Base : hardener = 80 : 20 ( by weight), 3: 1 ( by volume)

Application Method: airless spray, roller, brush

Mixing Procedure :	Add part B to part A and power mix for at least two minutes or until homogeneous.
Drying schedule :	Drying by solvent evaporation and chemical cross-linking. Higher film thickness, insufficient ventilation, or lower temperature will require longer drying. Excessive humidity or condensation on the surface can interfere with the drying cause discoloration and may result in a surface haze. Any haze or contamination must be removed by water washing before recoating.

This product requires the substrate temperature above the dew point ( + 3~5 ⁰ C). Condensation due to substrate temperatures below the dew point can cause flash rust on metal, affecting adhesion.

Color Different: The paint used as a primer or anti-fouling may have slight color variance between batches. Similarly, the paint under sunlight exposure may fade and chalk.

Application Procedure

Mix properly the paint before use.

1. Flush equipment with epoxy thinner before use.
2. Mix the paint (part A and Part B accordingly to the mixing ratio) thoroughly until homogeneous.
3. Thin with epoxy thinner only if necessary for workability.
4. When applying by conventional spray, use adequate air pressure and volume for proper atomization.
5. Apply a wet coat in even parallel passes, and overlap 50% to avoid holidays and pinholes.
6. Excessive thickness can prolong drying and sagging.
7. Clean up all equipment with thinner immediately after use.
8. Keep containers tightly close and store them in a proper storage area.

Condition of Application

Use a brush or roller with a 1/8” nap. Apply at a sufficient thickness and avoid repeating rolling to have good leveling.

Temperature	:	Min 5 ⁰ C ; Max 50 ⁰ C
Humidity	:	Maximum 85 % R.H.
For Airless spray:-
Tip Size	:	Graco 719 or equivalent
Paint Output pressure	:	8.8 – 11.8 MPa (g)
Viscosity	:	9.0 ~ 10.0 second ( Ford Cup no 4)
Thinning	:	10 – 25 % by volume
Suitable Thinner	:	Hana Thinner E QD

Surface Preparation

General :

Surfaces must be clean and dry, and all contaminants like dirt, dust, and oil must be removed by appropriate methods to ensure good adhesion.

Abrasive blast clean:

Abrasive blast clean to Sa 2.5 (ISO-8501) or SSPC-SP6. In case of hydro blasting or hydro jetting to remove the existing coating, ginger rust should be removed and blow dry before application. The surface profile must be a minimum of 50 microns.

Safety Precaution & Clean-Up

Safety :	Read and follow the material safety data sheet (MSDS) before use. Employ normal safety precautions. Put on necessary personal protection equipment when handling and using this product.
Ventilation :	when working in a confined workplace, thorough air ventilation must be used during and after application until the coating is cured. The ventilation system should be effective to prevent solvent vapor concentration from reaching a lower explosion limit for the product and to ensure exposure limit to the personnel is below the permissible exposure limit.
Caution :	All electrical equipment and installations should be made and properly grounded. In areas where explosion hazards exist, workmen should be used non-ferrous tools and conductive and non-sparkling shoes.
Clean-up :	Use Hana Paint polyurethane thinner (Hana Thinner U) or hydrocarbon solvent for cleaning. Observe safety precautions when using the solvents. In case of spillage, absorb and dispose of the material and used container according to local required regulations or through a licensed waste collector.

Disclaimer & Limited Warranty

Disclaimer

Data, specifications, directions, and recommendations given in this data sheet represent test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness, or appropriateness under the actual conditions of any intended use is not guaranteed and must be determined by the user. The products are delivered and any technical assistance is given subject to our GENERAL CONDITIONS OF SALE, DELIVERY, AND SERVICE and, unless otherwise expressly agreed in writing, manufacturer and seller assume no liability in excess of that stated therein for results obtained, injury, direct or consequential damage incurred from the use as recommended above or otherwise.

Limited Warranty

Whilst we endeavor to ensure that all advice we give about this product is correct and manufactured according to the standard quality control system, however, we have no control over either the quality or condition of the substrate or many other factors affecting the use and application of the product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage arising out of the use of this product.