Stabilis U IR

STABILIS U IR– IR Heat Reflective PU is a heat-reflective coating that is non-yellowing, durable, and has good physical and weathering properties.

Request Quote

Tambahkan ke Senarai Hajat

Features	Rintangan Menghakis, Pantulan Matahari, Rintangan Cuaca
Paints	Cat Logam, Cat Luaran
Size	1 Liter, 2 Liter, 5 Liter
Colors	Biru, coklat, hijau, kelabu, Jingga, merah, Violet, Putih hitam, Kuning
Blue	Biru Azure, Hitam Biru, Biru Cemerlang, Capri Biru, Cirrus, Biru Kobalt, Bunga jagung, Biru Jauh, ikan lumba-lumba, Dresden, Biru Gentian, Hijau Biru, Biru Kelabu, Larkspur, Biru muda, tengah malam, Biru Malam, Biru Laut, Biru Pastel, Mutiara Gentian, Biru Malam Mutiara, Merpati, Biru Merpati, Pinefrost, Pompadour, Regata, Biru Nilam, Biru Isyarat, Biru Langit, Biru Keluli, Trafalgar, Biru Trafik, Biru Turquoise, Ultramarine Blue, Viking, Biru Violet, Air Biru
Brown	Antelop, Beaver Brown, Beige Brown, Hitam Coklat, Berangan Berangan, Coklat coklat, Coklat Tanah Liat, konifer, Coklat Tembaga, coklat coklat, Hijau Coklat, Coklat Kelabu, Juniper, Mahogani Brown, Kacang coklat, Oker Brown, Olive Brown, Oren Coklat, coklat pucat, Tembaga Mutiara, Merah Coklat, Sepia Brown, Isyarat Brown, Terra Brown
Green	Hitam Hijau, Zaitun Hitam, Biru Hijau, Hijau Botol, Braemar, Hijau Coklat, Zaitun Coklat, Hijau Chromium, Citrine, Duckegg, Hijau Zamrud, Hijau Pakis, Hijau Cemara, Garland, Hijau Rumput, Zaitun Kelabu, Greyfriar, Hollybush, Ivy Green, Hijau Daun, Lido, Lampu hijau, Linden, Hijau Bercahaya, Hijau Mei, Hijau Pudina, Turquoise pudina, Hijau Lumut, Hijau Zaitun, Hijau Opal, Orion, Hijau Pucat, Hijau Pastel, Pastel Turquoise, Patina Hijau, Hijau Mutiara, Hijau Opal Mutiara, Hijau Pine, Hijau Tulen, Buluh Hijau, Reseda Hijau, Scarab, Sherwood, Hijau isyarat, Daun musim bunga, Hijau Trafik, Hijau Turquoise, Verona, Kuning hijau, Zaitun Kuning
Grey	Agate Grey, Kelabu Antrasit, Kelabu Basalt, Kelabu Beige, Kelabu Hitam, Biru Kelabu, Kelabu Coklat, Kelabu Simen, daun kucai, Kelabu Konkrit, Kelabu Berhabuk, Flint Grey, Sayap angsa, Kelabu Granit, Kelabu Grafit, Kelabu Hijau, Kelabu besi, Batu besi, Khaki Kelabu, Kelabu cerah, Loganberry, Merlin, Kelabu Lumut, Kelabu Tikus, Kelabu Zaitun, Kelabu Tikus Mutiara, Kelabu Pebble, Kelabu Platinum, Kelabu Kuarza, Raven, badak sumbu, Isyarat Kelabu, Kelabu Sutera, Kelabu Perak, Kelabu Batu Tulis, Tupai Kelabu, Kelabu Batu, Tarpaulin Kelabu, Telegrey 1, Telegrey 2, Telegrey 4, Tideway, Kelabu Trafik A, Kelabu Trafik B, penyu, Umbra Kelabu, Vandyke, Kelabu Tingkap, Woodash, Kuning Kelabu
Orange	Aprikot, Azalea, Darah oren, Jingga Merah Terang, Cameo, Clementine, Jingga Pedalam, Jingga Cerah Bercahaya, Jingga Bercahaya, Lupin, Oren Pastel, Oren Mutiara, Poppy, Oren Tulen, Jingga RAL[3], Jingga Merah, Oren Salmon, Shell, Isyarat Jingga, Jingga Trafik, Jingga Kuning
Red	Merah Jambu Antik, Buluh, Merah Beige, Hitam Merah, Merah Coklat, Brownstone, Merah Carmine, Kayu manis, Beech Tembaga, Merah Karang, Merah Api, Fontana, Merah jambu cerah, Mace, Mallow, raja, Nektarin, Merah Oksida, Kelopak, Plum, Merah Ungu, Mawar, Rosepetal, Rosevale, Ruby Red, Pelana, Batu pasir, Isyarat Merah, Merah Strawberi, kuning kecoklatan, Teh Mawar, Tomato Merah, Trafik Merah, Merah Wain
Violet	Lilac Biru, Claret Violet, Heather, Heather Violet, Pageant, Pastel Violet, Blackberry Mutiara, Violet Mutiara, Ungu Ungu, Lilac Merah, Merah Violet, Regalia, Isyarat Violet, Telemagenta, Trafik Ungu
White, Black & Silver	Alpine, Black, Clean Room White, Cream, Dove, Flake Grey, Gardenia, Graphite Black, Grey Aluminium, Grey White, Heron, Honeysuckle, Jet Black, Magnolia, Papyrus White, Pearl Dark Grey, Pearl Light Grey, Portland, Pure White, Signal Black, Signal White, Traffic Black, Traffic White, White Aluminium
Yellow	Aztec, Beige, Bison, Bracken, Penyapu Kuning, Brown Beige, Susu mentega, Kuning Kenari, Capricorn, Catkin, Colza Kuning, kari, Daffodil Kuning, Dahlia Kuning, Florida, Forsythia, Piala emas, Kuning Emas, Hijau Beige, Beige Kelabu, Kuning Madu, Hopsack, gading, Jonquil, Kuning Lemon, Gading Ringan, cicak, Kuning Bercahaya, Jagung Kuning, Kuning Melon, Moorland, Kuning Oker, Kuning Zaitun, Putih Tiram, Kuning Pastel, Pearl Beige, Emas Mutiara, Debunga, Kuning Safron, Pasir Kuning, Savannah, Rumpai laut, Sierra, Isyarat Kuning, Kuning Sulfur, Kuning Matahari, Kuning Trafik, Willow, Zink Kuning

Description

STABILIS U IR– IR Heat Reflective PU is a two-component, non-yellowing aliphatic polyurethane IR heat reflective coating based on an acrylic polyol and aliphatic polyisocyanate system without free isocyanate monomer in the paint film. It has excellent durability in a wide range of corrosive environments, good physical properties such as impact and abrasion resistance, and excellent weathering properties. The coating can be applied by spray, brush, or roller, and is suitable for use as a finish coat in anti-corrosive and IR heat reflective coating systems for both new building repair/maintenance systems for concrete and steel structures (e.g., rooftops) as well as ships’ accommodation areas offshore.

Features

Excellent durability in a wide range of corrosive environments.
Easy to use – spray, brush, roller
Excellent physical properties such as impact, toughness, and abrasion resistance.
Excellent weathering properties.
Suitable for a finish coat of anti-corrosive coating
System and IR Heat Reflective properties to cool down the surface temperature and reduce energy consumption for air-conditioning.
Suitable to use as a duplex system and can apply directly to single-pack film galvanizing metallic coating.

Typical Uses

Suitable for use as a finish coat in anti-corrosive and IR Heat Reflective coating systems in both new buildings, repair, and maintenance systems for concrete and steel structures, such as rooftops, roof tiles, silo storage tanks, accommodation of ships and off-shore structures, external of tanks and bridges.

Physical Data

Color	:	As specified
Flash Points	:	Base : 23.0 ⁰C Hardener : 29.5 ⁰C
Volume Solid	:	60+/- 2%
VOC(as supplied)	:	400 g/L
Shelf Life @25⁰C / indoor	:	24 months

Typical Thickness: 40 ~ 80µ dried film.

Drying Time(at Dry Film Thickness 75µ)	Temperature	10⁰C	20⁰C	30⁰C
	Surface Dry	40mins	30mins	20mins
	Hard Dry	12 hrs	8.0 hrs	6.0 hrs
Painting interval:	Minimum	12 hrs	8 hrs	6.0 hrs
Painting interval:	Max. (self)	–	–	–
Pot LIfe		7.0 hrs	5.0hrs	3.0hrs
Theoretical coverage (at DFT 40- 80µ)		0.07~0.133 L/m² ; 14.3 ~ 7.5 m²/L
Service temperature		-60 to 150⁰C (dry)

Application Data

Mixing ratio : Base : hardener = 83 : 17 ( by weight)

Application Method: airless spray, roller, brush

Mixing Procedure :	Add part B to part A and power mix for at least two minutes or until homogeneous.
Drying schedule :	Drying by solvent evaporation and chemical cross-linking. Higher film thickness, insufficient ventilation, or lower temperature will require longer drying. Excessive humidity or condensation on the surface can interfere with the drying cause discoloration and may result in a surface haze. Any haze or contamination must be removed by water washing before recoating.

This product requires the substrate temperature above the dew point ( + 3~5 ⁰ C). Condensation due to substrate temperatures below the dew point can cause flash rust on metal, affecting adhesion.

Application Procedure

Mix the paint properly before use.

Flush equipment with polyurethane thinner before use.
Mix the paint (part A and Part B accordingly to the mixing ratio) thoroughly until homogeneous.
Thin with Hana Thinner U only if necessary for workability.
When applying by conventional spray, use adequate air pressure and volume for proper atomization.
Apply a wet coat in even parallel passes, overlapping 50% to avoid holidays and pinholes.
Excessive thickness can prolong drying and sagging.
Clean up all equipment with thinner immediately after use.
Keep containers tightly close and stored them in a proper storage area.

Condition of Application

Use a brush or roller with a 1/8” nap. Apply at a sufficient thickness and avoid repeating rolling to have good leveling.

Temperature	:	Min 5 ⁰ C ; Max 50 ⁰ C
Humidity	:	Maximum 85 % R.H.
For Airless spray:-
Tip Size	:	Graco 515, 615 or equivalent
Paint Output pressure	:	14.7 – 23.5 MPa (g)
Viscosity	:	30 ~ 50 sec ( Ford Cup)
Thinning	:	0 – 15 % by volume

Surface Preparation

General :

Surfaces must be clean and dry, and all contaminants like dirt, dust, and oil must be removed by appropriate methods to ensure good adhesion.

Abrasive blast clean:

Abrasive blast clean to Sa 2.5 (ISO-8501) or SSPC-SP6. In case of hydro blasting or hydro jetting to remove the existing coating, ginger rust should be removed and blow dry before application. The surface profile must be a minimum of 50 microns.

Shop primed steelwork:

The Weld seam and the damaged area should be cleaned to a minimum St3 or SSPC-SP3. The shop-primed steelwork should be repaired for any rust and free from contaminants with suitable secondary surface preparation such as spot blast, sweeping, or power tooling.

Performance Data

Properties	Test Method	Evaluation
Adhesion Strength	ASTM D3359-09	24/25 5A
Salt Spray ( 5% NaCl solution)	ASTM B117	1500hrs, passed C5M, as system
Humidity (50 ⁰C, 100% RH)	ASTM D1748	1000hrs, passed C5M, as system

Safety Precaution & Clean-Up

Safety :	Read and follow the material safety data sheet (MSDS) before use. Employ normal safety precautions. Put on necessary personal protection equipment when handling and using this product.
Ventilation :	when working in a confined workplace, thorough air ventilation must be used during and after application until the coating is cured. The ventilation system should be effective to prevent solvent vapor concentration from reaching a lower explosion limit for the product and to ensure exposure limit to the personnel is below the permissible exposure limit.
Caution :	All electrical equipment and installations should be made and properly grounded. In areas where explosion hazards exist, workmen should be used non-ferrous tools and conductive and non-sparkling shoes.
Clean-up :	Use Hana Paint polyurethane thinner (Hana Thinner U) or hydrocarbon solvent for cleaning. Observe safety precautions when using the solvents. In case of spillage, absorb and dispose of the material and used container according to local required regulations or through a licensed waste collector.

Disclaimer & Limited Warranty

Disclaimer

Data, specifications, directions, and recommendations given in this data sheet represent test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness, or appropriateness under the actual conditions of any intended use is not guaranteed and must be determined by the user. The products are delivered and any technical assistance is given subject to our GENERAL CONDITIONS OF SALE, DELIVERY, AND SERVICE and, unless otherwise expressly agreed in writing, manufacturer and seller assume no liability in excess of that stated therein for results obtained, injury, direct or consequential damage incurred from the use as recommended above or otherwise.

Limited Warranty

Whilst we endeavor to ensure that all advice we give about this product is correct and manufactured according to the standard quality control system, however, we have no control over either the quality or condition of the substrate or many other factors affecting the use and application of the product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage arising out of the use of this product.

Need Help?

Send Us An Email

Contact us at info@awatrahana.com or call us at +60143989049 for questions related to this products or send us a form via the contact form below.

Nama awak Emel anda Nombor Perhubungan produk Tanya tentang Produk Lain

Subjek Mesej anda (pilihan)

Reviews

Tiada ulasan lagi.

Jadilah yang pertama mengulas “Stabilis U IR” Batal balasan

Anda mesti logged in untuk menyiarkan ulasan.

Sign up for Newsletter

Stabilis U IR

Description

Features

Typical Uses

Physical Data

Application Data

Application Procedure

Condition of Application

Surface Preparation

Performance Data

Safety Precaution & Clean-Up

Disclaimer & Limited Warranty

Need Help?

Reviews

Jadilah yang pertama mengulas “Stabilis U IR” Batal balasan

Pautan pantas

Log masuk

Semak imbas Produk Oleh

Sign up for Newsletter

Stabilis U IR

Description

Features

Typical Uses

Physical Data

Application Data

Application Procedure

Condition of Application

Surface Preparation

Performance Data

Safety Precaution & Clean-Up

Disclaimer & Limited Warranty

Need Help?

Reviews

Jadilah yang pertama mengulas “Stabilis U IR” Batal balasan

Produk Berkaitan

Pautan pantas

Log masuk

Semak imbas Produk Oleh

Cart

Log Masuk

Daftar