EnglishNikmati diskaun 5% dengan pesanan pertama anda
Stabilis U
RM56.30
Stabilis U is a high-quality, weather-resistant coating that is suitable for use as a finish coat in anti-corrosive coating systems.
- Additional information
- Description
- Features
- Typical Uses
- Physical Data
- Application Data
- Application Procedure
- Condition of Application
- Surface Preparation
- Performance Data
- Safety Precaution & Clean-Up
- Disclaimer & Limited Warranty
- Need Help?
- Reviews (0)
Description
Looking for a reliable, tough, and weather-resistant coating for your metal surfaces? Look no further than Stabilis U. This two-component aliphatic polyurethane coating is based on an acrylic polyol and aliphatic polyisocyanate system, making it highly resistant to corrosion. It’s also easy to use, with excellent physical properties like impact resistance and toughness. Plus, it’s suitable for use as a finish coat in anti-corrosive coating systems. So if you’re looking for a high-quality coating that will stand up to the elements, Stabilis U is a perfect choice.
Features
Typical Uses
Physical Data
Application Data
Application Procedure
Condition of Application
Surface Preparation
Performance Data
Safety Precaution & Clean-Up
|
Safety : |
Read and follow the material safety data sheet (MSDS) before use. Employ normal safety precautions. Put on necessary personal protection equipment when handling and using this product. |
| Ventilation : | when working in a confined workplace, thorough air ventilation must be used during and after application until the coating is cured. The ventilation system should be effective to prevent solvent vapor concentration from reaching a lower explosion limit for the product and to ensure exposure limit to the personnel is below the permissible exposure limit. |
| Caution : | All electrical equipment and installations should be made and properly grounded. In areas where explosion hazards exist, workmen should be used non-ferrous tools and conductive and non-sparkling shoes. |
| Clean-up : | Use Hana Paint polyurethane thinner (Hana Thinner U) or hydrocarbon solvent for cleaning. Observe safety precautions when using the solvents. In case of spillage, absorb and dispose of the material and used container according to local required regulations or through a licensed waste collector. |
Disclaimer & Limited Warranty
Disclaimer
Data, specifications, directions, and recommendations given in this data sheet represent test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness, or appropriateness under the actual conditions of any intended use is not guaranteed and must be determined by the user. The products are delivered and any technical assistance is given subject to our GENERAL CONDITIONS OF SALE, DELIVERY, AND SERVICE and, unless otherwise expressly agreed in writing, manufacturer and seller assume no liability in excess of that stated therein for results obtained, injury, direct or consequential damage incurred from the use as recommended above or otherwise.
Limited Warranty
Whilst we endeavor to ensure that all advice we give about this product is correct and manufactured according to the standard quality control system, however, we have no control over either the quality or condition of the substrate or many other factors affecting the use and application of the product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage arising out of the use of this product.
Need Help?
Send Us An Email
Contact us at info@awatrahana.com or call us at +60143989049 for questions related to this products or send us a form via the contact form below.
Jadilah yang pertama mengulas “Stabilis U”
Anda mesti logged in untuk menyiarkan ulasan.
Produk Berkaitan
Stabilis
Price range: RM43.50 through RM181.25
STABILIS E-SP is a primer that can be used as a temporary protective coating for blast-cleaned steel plates and structures.
This product has multiple variants. The options may be chosen on the product page
Stabilis
HANA STABILIS is a high solid and high-performance tin-free self-polishing Ant fouling paint that has long-lasting anti-fouling performance against marine organisms.
Stabilis
HANA STABILIS AF-200 is a TBT-free self-polishing anti-fouling paint that uses an advanced leaching control mechanism for long-lasting protection against marine organisms.
Stabilis
STABILIS E-MIO is a two-component, high solid, surface tolerant pure epoxy micaceous iron oxide coating that can be used as an anti-corrosive primer in severe environments.
Stabilis
Price range: RM58.50 through RM243.75
STABILIS EP TIE is a two-component epoxy coating that can be used as an intermediate coat for the anti-fouling or undercoating of epoxy systems in severely corrosive environments.
This product has multiple variants. The options may be chosen on the product page
Stabilis
Price range: RM30.75 through RM175.50
Stabilis S is a high build, one-pack alkyd base general purpose high gloss finish coat that offers excellent adhesion, weather resistance, and high resistance to seawater and other liquids.
This product has multiple variants. The options may be chosen on the product page
Stabilis
RM600.00
HANA STABILIS AF-100 is a high-solid, TBT-free self-polishing anti-fouling paint that uses an advanced leaching control mechanism for long-lasting protection against marine organisms.
This product has multiple variants. The options may be chosen on the product page
Stabilis
Stabilis HT primer is a heat-resistant silicone coating that can withstand temperatures up to 700 degrees Celsius.
Reviews
Tiada ulasan lagi.