| Features | |
|---|---|
| Paints | |
| Size | |
| Colors |
Nikmati diskaun 5% dengan pesanan pertama anda
Nikmati diskaun 5% dengan pesanan pertama anda
Signup for our newsletter to get notified about sales and new products. Add any text here or remove it.
Error: Contact form not found.
Nikmati diskaun 5% dengan pesanan pertama anda
Tiada produk dalam troli.
Stabilis S Silver is a high-quality, lead, and chrome-free paint that is easy to apply and resistant to weather conditions.
| Features | |
|---|---|
| Paints | |
| Size | |
| Colors |
Looking for a long-lasting, high-gloss finish coat that can withstand even the harshest weather conditions? Stabilis S Silver is your perfect solution! This lead and chrome-free paint is easy to apply and dries quickly, while still providing excellent adhesion on alkyd or oleoresinous rust-inhibitive primer and undercoat. Plus, its good physical properties like impact resistance and flexibility make it ideal for metal and wooden structures like bridges, tank externals, and accommodation. And did we mention it’s also highly resistant to seawater, water, and oil? So no matter what your project entails, Stabilis S Silver is up for the task!
Recommended as a finish coat of alkyd paint system for various plants, steel and metal structures, tank externals, bridges, accommodation, engine rooms, etc, and wooden substrate.
| Color | : | Silver |
| Flash Points | : | 37.0 0C |
| Volume Solid | : | 41+/- 2% |
| VOC(as supplied) | : | 483g/L |
| Shelf Life @250C / indoor | : | 24 months |
Typical Thickness: 30 ~ 50m dried film.
| Drying Time(at Dry Film Thickness 30m) | Temperature | 100C | 200C | 300C |
| Surface Dry | 2.0 hrs | 1.0 hrs | 0.5 hrs | |
| Hard Dry | 10 hrs | 6.0 hrs | 3.0 hrs | |
| Painting interval: | Minimum | 20 hrs | 15 hrs | 10 hrs |
| Max. (self) | – | – | – | |
| Theoretical coverage (at DFT 30- 50m) |
0.073~0.122L/m2 ; 13.7 ~ 8.2m2/L | |||
| Service temperature | -60 to 150 0C (dry) | |||
Thinner: Hana Thinner S, Alkyd or Oil base Thinner
Application Method: airless spray, roller, brush
| Mixing Procedure : | Power mix for at least two minutes or until homogeneous. |
| Drying schedule : | Single pack and drying by solvent evaporation and oxidation. Higher film thickness, insufficient ventilation, or lower temperature will require longer drying time. Excessive humidity or condensation on the surface can interfere with the drying cause discoloration and may result in a surface haze. Any haze or contamination must be removed by water washing before recoating. |
This product requires the substrate temperature to be above the dew point ( + 3~5 0 C). Condensation due to substrate temperatures below the dew point can cause flash rust on metal and adhesion will be affected.
Color Different: The paint used as primer or anti-fouling may have slight color variance between batches. Similarly, the paint under sunlight exposure may fade and chalk.
Mix properly the paint before use.
Use a brush or roller with a 1/8” nap. Apply at a sufficient thickness and avoid repeating rolling to have good leveling.
| Temperature | : | Min 5 0 C ; Max 50 0 C | ||
| Humidity | : | Maximum 85 % R.H. | ||
| For Airless spray:- | ||||
| Tip Size | : | Graco 613, 713 or equivalent | ||
| Paint Output pressure | : | 10.7 – 13.8 MPa (g) | ||
| Viscosity | : | 30-40 sec Ford Cup No 4 | ||
| Thinning | : | 0 – 10 % by volume | ||
| General : |
| Surfaces must be clean and dry, and all contaminants like dirt, dust, and oil must be removed by appropriate methods to ensure good adhesion.
|
| Abrasive blast clean: |
| Abrasive blast clean to Sa 2.5 (ISO-8501) or SSPC-SP6. In case of hydro blasting or hydro jetting to remove the existing coating, ginger rust should be removed and blow dry before application. The surface profile must be a minimum of 50 microns.
|
| Shop primed steelwork: |
| The Weld seam and the damaged area should be cleaned to a minimum St3 or SSPC-SP3. The shop-primed steelwork should be repaired for any rust and free from any contaminant with suitable secondary surface preparation such as spot blasts, sweeping, or power tooling.
|
|
Safety : |
Read and follow the material safety data sheet (MSDS) before use. Employ normal safety precautions. Put on necessary personal protection equipment when handling and using this product. |
| Ventilation : | when working in a confined workplace, thorough air ventilation must be used during and after application until the coating is cured. The ventilation system should be effective to prevent solvent vapor concentration from reaching a lower explosion limit for the product and to ensure exposure limit to the personnel is below the permissible exposure limit. |
| Caution : | All electrical equipment and installations should be made and properly grounded. In areas where explosion hazards exist, workmen should be used non-ferrous tools and conductive and non-sparkling shoes. |
| Clean-up : | Use Hana Paint polyurethane thinner (Hana Thinner U) or hydrocarbon solvent for cleaning. Observe safety precautions when using the solvents. In case of spillage, absorb and dispose of the material and used container according to local required regulations or through a licensed waste collector. |
Disclaimer
Data, specifications, directions, and recommendations given in this data sheet represent test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness, or appropriateness under the actual conditions of any intended use is not guaranteed and must be determined by the user. The products are delivered and any technical assistance is given subject to our GENERAL CONDITIONS OF SALE, DELIVERY, AND SERVICE and, unless otherwise expressly agreed in writing, manufacturer and seller assume no liability in excess of that stated therein for results obtained, injury, direct or consequential damage incurred from the use as recommended above or otherwise.
Limited Warranty
Whilst we endeavor to ensure that all advice we give about this product is correct and manufactured according to the standard quality control system, however, we have no control over either the quality or condition of the substrate or many other factors affecting the use and application of the product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage arising out of the use of this product.
Send Us An Email
Contact us at info@awatrahana.com or call us at +60143989049 for questions related to this products or send us a form via the contact form below.
Anda mesti logged in untuk menyiarkan ulasan.
Stabilis
HANA STABILIS AF-200 ialah cat anti-kotoran penggilap diri bebas TBT yang menggunakan mekanisme kawalan larut lesap termaju untuk perlindungan tahan lama terhadap organisma marin.
Stabilis
Stabilis EP-Gard XTRA ialah salutan epoksi fenolik pejal tinggi dua komponen padat poliamida adiduk epoksi yang memberikan rintangan kimia yang sangat baik.
This product has multiple variants. The options may be chosen on the product pageStabilis
Stabilis ACR ialah salutan epoksi akrilik penyebuan sendiri yang boleh digunakan sebagai primer dan lapisan atas pada permukaan logam.
This product has multiple variants. The options may be chosen on the product pageStabilis
Primer Stabilis HT ialah salutan silikon tahan haba yang boleh menahan suhu sehingga 700 darjah Celsius.
Stabilis
STABILIS EP-GARD ialah cat salutan epoksi dua komponen yang mudah digunakan dan mempunyai rintangan kimia yang sangat baik.
This product has multiple variants. The options may be chosen on the product pageStabilis
Stabilis Max ialah buku asas epoksi seramik pejal dua komponen tinggi yang diperkukuh dengan MIO untuk kekuatan dan ketahanan yang luar biasa terhadap kerosakan permukaan dan kelembapan.
Stabilis
Stabilis HT ialah salutan silikon tahan haba yang boleh menahan suhu sehingga 700 darjah Celsius.
This product has multiple variants. The options may be chosen on the product pageStabilis
Stabilis E-ZP ialah salutan zink fosfat epoksi tulen tahan permukaan pepejal tinggi yang memberikan ketahanan yang sangat baik walaupun dalam persekitaran yang paling menghakis.
This product has multiple variants. The options may be chosen on the product pageTiada produk dalam troli.
Reviews
Tiada ulasan lagi.