Stabilis S Silver

Stabilis S Silver is a high-quality, lead, and chrome-free paint that is easy to apply and resistant to weather conditions.

Request Quote

[ht-ctc-chat call_to_action="Whatsapp Enquiry" pre_filled="Hello ,I would like to inquire on {{url}}" style=8]

Wishlist

SKU: N/A Category: Stabilis Tags: external tanks, steel and metal structure

Features	Corrosive Resistance, Weather Resistance
Paints	Metal Paint, Exterior Paint
Size	1 Litre, 2 Litres, 5 Litres
Colors	Silver

Description

Looking for a long-lasting, high-gloss finish coat that can withstand even the harshest weather conditions? Stabilis S Silver is your perfect solution! This lead and chrome-free paint is easy to apply and dries quickly, while still providing excellent adhesion on alkyd or oleoresinous rust-inhibitive primer and undercoat. Plus, its good physical properties like impact resistance and flexibility make it ideal for metal and wooden structures like bridges, tank externals, and accommodation. And did we mention it’s also highly resistant to seawater, water, and oil? So no matter what your project entails, Stabilis S Silver is up for the task!

Features

Lead & chrome free system
Excellent adhesion on alkyd or oleoresinous rust-inhibitive primer and undercoat.
Good weather resistance property
Good gloss and color retention properties
Easy to apply and fast dry.
Good physical properties such as impact resistance and flexibility
High resistance to seawater, water, oil, etc

Typical Uses

Recommended as a finish coat of alkyd paint system for various plants, steel and metal structures, tank externals, bridges, accommodation, engine rooms, etc, and wooden substrate.

Physical Data

Color	:	Silver
Flash Points	:	37.0 ⁰C
Volume Solid	:	41+/- 2%
VOC(as supplied)	:	483g/L
Shelf Life @25⁰C / indoor	:	24 months

Typical Thickness: 30 ~ 50m dried film.

Drying Time(at Dry Film Thickness 30m)	Temperature	10⁰C	20⁰C	30⁰C
	Surface Dry	2.0 hrs	1.0 hrs	0.5 hrs
	Hard Dry	10 hrs	6.0 hrs	3.0 hrs
Painting interval:	Minimum	20 hrs	15 hrs	10 hrs
Painting interval:	Max. (self)	–	–	–
Theoretical coverage (at DFT 30- 50m)		0.073~0.122L/m² ; 13.7 ~ 8.2m²/L
Service temperature		-60 to 150⁰C (dry)

Application Data

Thinner: Hana Thinner S, Alkyd or Oil base Thinner

Application Method: airless spray, roller, brush

Mixing Procedure :	Power mix for at least two minutes or until homogeneous.
Drying schedule :	Single pack and drying by solvent evaporation and oxidation. Higher film thickness, insufficient ventilation, or lower temperature will require longer drying time. Excessive humidity or condensation on the surface can interfere with the drying cause discoloration and may result in a surface haze. Any haze or contamination must be removed by water washing before recoating.

This product requires the substrate temperature to be above the dew point ( + 3~5 ⁰ C). Condensation due to substrate temperatures below the dew point can cause flash rust on metal and adhesion will be affected.

Color Different: The paint used as primer or anti-fouling may have slight color variance between batches. Similarly, the paint under sunlight exposure may fade and chalk.

Application Procedure

Mix properly the paint before use.

Flush equipment with alkyd thinner before use.
Mix the paint thoroughly until homogeneous.
Thin with Hana Thinner S only if necessary for workability.
When applying by conventional spray, use adequate air pressure and volume for proper atomization.
Apply a wet coat in even parallel passes, overlapping 50% to avoid holidays and pinholes.
Excessive thickness can prolong drying and sagging.
Clean up all equipment with thinner immediately after use.
Keep containers tightly close and store them in a proper storage area.

Condition of Application

Use a brush or roller with a 1/8” nap. Apply at a sufficient thickness and avoid repeating rolling to have good leveling.

Temperature	:	Min 5 ⁰ C ; Max 50 ⁰ C
Humidity	:	Maximum 85 % R.H.
For Airless spray:-
Tip Size	:	Graco 613, 713 or equivalent
Paint Output pressure	:	10.7 – 13.8 MPa (g)
Viscosity	:	30-40 sec Ford Cup No 4
Thinning	:	0 – 10 % by volume

Surface Preparation

General :

Surfaces must be clean and dry, and all contaminants like dirt, dust, and oil must be removed by appropriate methods to ensure good adhesion.

Abrasive blast clean:

Abrasive blast clean to Sa 2.5 (ISO-8501) or SSPC-SP6. In case of hydro blasting or hydro jetting to remove the existing coating, ginger rust should be removed and blow dry before application. The surface profile must be a minimum of 50 microns.

Shop primed steelwork:

The Weld seam and the damaged area should be cleaned to a minimum St3 or SSPC-SP3. The shop-primed steelwork should be repaired for any rust and free from any contaminant with suitable secondary surface preparation such as spot blasts, sweeping, or power tooling.

Safety Precaution & Clean-Up

Safety :	Read and follow the material safety data sheet (MSDS) before use. Employ normal safety precautions. Put on necessary personal protection equipment when handling and using this product.
Ventilation :	when working in a confined workplace, thorough air ventilation must be used during and after application until the coating is cured. The ventilation system should be effective to prevent solvent vapor concentration from reaching a lower explosion limit for the product and to ensure exposure limit to the personnel is below the permissible exposure limit.
Caution :	All electrical equipment and installations should be made and properly grounded. In areas where explosion hazards exist, workmen should be used non-ferrous tools and conductive and non-sparkling shoes.
Clean-up :	Use Hana Paint polyurethane thinner (Hana Thinner U) or hydrocarbon solvent for cleaning. Observe safety precautions when using the solvents. In case of spillage, absorb and dispose of the material and used container according to local required regulations or through a licensed waste collector.

Disclaimer & Limited Warranty

Disclaimer

Data, specifications, directions, and recommendations given in this data sheet represent test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness, or appropriateness under the actual conditions of any intended use is not guaranteed and must be determined by the user. The products are delivered and any technical assistance is given subject to our GENERAL CONDITIONS OF SALE, DELIVERY, AND SERVICE and, unless otherwise expressly agreed in writing, manufacturer and seller assume no liability in excess of that stated therein for results obtained, injury, direct or consequential damage incurred from the use as recommended above or otherwise.

Limited Warranty

Whilst we endeavor to ensure that all advice we give about this product is correct and manufactured according to the standard quality control system, however, we have no control over either the quality or condition of the substrate or many other factors affecting the use and application of the product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage arising out of the use of this product.