Stabilis AF-300 plus

HANA STABILIS AF-300 PLUS is a self-polishing, copper-free, tin-free anti-fouling paint that uses an advanced hydrolysis mechanism for long-lasting performance against marine organisms.

Request Quote

[ht-ctc-chat call_to_action="Whatsapp Enquiry" pre_filled="Hello ,I would like to inquire on {{url}}" style=8]

Wishlist

Category: Stabilis Tags: antifouling, ship hull

Features	Bacterial & Fungue Resistance, Corrosive Resistance, Environmental Friendly, Weather Resistance
Colors	White
Paints	Metal Paint, Exterior Paint, Surface Treatment
Size	1 Litre, 2 Litres, 5 Litres, 400 ml

Description

HANA STABILIS AF-300 PLUS is a high-performance, copper-free, tin-free self-polishing Anti fouling paint based on an advanced hydrolysis Mechanism for long-lasting anti-fouling performance against marine organisms. The highly active hydrolysis polymer ensures the effectiveness and leaching of active ingredients with a thin reaction layer. TBT & copper-free self-polishing anti-fouling paint for new-building and repair maintenance. Advanced Hydrolysis Mechanism for long-term protection against marine organisms. It complies with IMO Anti-fouling System Convention (AFS/CONF26). It is suitable for vessels trading at a wide range of speeds and activity including coastal and ocean-going vessels up to 60 months.

Features

TBT & copper-free self-polishing anti-fouling paint for new building and repair maintenance.
Advanced Hydrolysis Mechanism for long-term protection against marine organisms.
It complies with IMO Anti-fouling System Convention (AFS/CONF26)
It is suitable for vessels trading at a wide range of speeds and activities.
Suitable for coastal and slow-moving vessels
Suitable for ocean-going vessels for up to 60 months.

Typical Uses

Recommended as an anti-fouling system for the bottom, vertical hull, and boot-top on vessels operating in global waters. It is Suitable for coastal and ocean-going vessel trade at low to medium speed and low to medium activity. It may be used for offshore structures, slow-moving storage vessels, or fishing boats.

Physical Data

Color	:	White,
Flash Points	:	24.0 ⁰C
Volume Solid	:	42+/- 2%
VOC(as supplied)	:	510 g/L
Shelf Life @25⁰C / indoor	:	12 months

Typical Thickness: 75 ~ 100µ dried film.

Drying Time(at Dry Film Thickness 100µ)	Temperature		10⁰C	20⁰C	30⁰C
	Surface Dry		2 hrs	1.0hrs	0.5 hrs
	Hard Dry		8 hrs	5 hrs	4 hrs
Painting interval:	Minimum		8 hrs	5 hrs	4 hrs
	Max. (self)		–	–	–
Dry To Launch			18.0 hrs	12.0hrs	10.0hrs
Film Thickness		Wet film Dried film	178 ~ 238 µ ; 75 ~ 100 µ
Theoretical coverage (at DFT 75µ)			0.18~0.240 L/m²; 9.1 ~ 4. 5 m²/L

Application Data

Thinner: Acrylic Thinner or Xylene

Application Method: airless spray, roller, brush

Mixing Procedure :	Power mix the paint for at least two minutes or until homogeneous.
Drying schedule :	One pack and drying by solvent evaporation. Higher film thickness, insufficient ventilation, or lower temperature will require longer drying.

This product requires the substrate temperature above the dew point ( + 3~5 ⁰ C). Condensation due to substrate temperatures below the dew point can cause flash rust on metal, affecting adhesion.

Color Different: The paint used as a primer or anti-fouling may have slight color variance between batches. Similarly, the paint under sunlight exposure may fade and chalk.

Application Procedure

Mix properly the paint before use.

Flush equipment with Hana Thinner A before use.
Mix the paint thoroughly until homogeneous.
Thin with Thinner A only if necessary for workability.
When applying by conventional spray, use adequate air pressure and volume for proper atomization.
Apply a wet coat in even parallel passes, and overlap 50% to avoid holidays and pinholes.
Excessive thickness can prolong drying and sagging.
Clean up all equipment with thinner immediately after use.
Keep containers tightly close and store them in the proper storage area.

Condition of Application

Use a brush or roller with a 1/8″ nap. Apply at a sufficient thickness and avoid repeating rolling to have good leveling.

Temperature	:	Min 5 ⁰ C
Humidity	:	Maximum 85 % R.H.
For Airless spray:-
Tip Size	:	Graco 621 ~ 735 or equivalent
Paint Output pressure	:	11.7 – 14.7 MPa (g)
Thinning	:	0 – 10 % by volume

Surface Preparation

General :

Surfaces must be clean and dry, and all contaminants like dirt, dust, and oil must be removed by appropriate methods to ensure good adhesion.

Repair:

Existing aged anti-fouling paint and leached layer must be removed by fresh water washing close to the surface with pressure up to 250 bar 3500psi or higher. An excessive leached/skeleton layer will be weakened by fresh paint and may result in cohesive failure and spot detachment.

Spot touch-up or blasting to Sa 2.5:

Used recommended primer system and observed coating interval. Light sanding on primer is recommended if exceeds the coating interval.

Safety Precaution & Clean-Up

Safety :	Read and follow the material safety data sheet (MSDS) before use. Employ normal safety precautions. Put on necessary personal protection equipment when handling and using this product.
Ventilation :	when working in a confined workplace, thorough air ventilation must be used during and after application until the coating is cured. The ventilation system should be effective to prevent solvent vapor concentration from reaching a lower explosion limit for the product and to ensure exposure limit to the personnel is below the permissible exposure limit.
Caution :	All electrical equipment and installations should be made and properly grounded. In areas where explosion hazards exist, workmen should be used non-ferrous tools and conductive and non-sparkling shoes.
Clean-up :	Use Hana Paint polyurethane thinner (Hana Thinner U) or hydrocarbon solvent for cleaning. Observe safety precautions when using the solvents. In case of spillage, absorb and dispose of the material and used container according to local required regulations or through a licensed waste collector.

Disclaimer & Limited Warranty

Disclaimer

Data, specifications, directions, and recommendations given in this data sheet represent test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness, or appropriateness under the actual conditions of any intended use is not guaranteed and must be determined by the user. The products are delivered and any technical assistance is given subject to our GENERAL CONDITIONS OF SALE, DELIVERY, AND SERVICE and, unless otherwise expressly agreed in writing, manufacturer and seller assume no liability in excess of that stated therein for results obtained, injury, direct or consequential damage incurred from the use as recommended above or otherwise.

Limited Warranty

Whilst we endeavor to ensure that all advice we give about this product is correct and manufactured according to the standard quality control system, however, we have no control over either the quality or condition of the substrate or many other factors affecting the use and application of the product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage arising out of the use of this product.

Need Help?

Send Us An Email

Contact us at info@awatrahana.com or call us at +60143989049 for questions related to this products or send us a form via the contact form below.

Your name Your email Contact No Product Enquire on Other Product

Subject Your message (optional)

Reviews

There are no reviews yet.

Be the first to review “Stabilis AF-300 plus” Cancel reply

You must be logged in to post a review.

tel: +6010 231 7228

Available 9:00 - 18:00

info@awatrahana.com

Drop us a mail

Sign up for Newsletter